Solution Monitoring Procedure
- Check lithium bromide solution level and top up if required
- Verify solution concentration and prevent crystallization risk
- Test and document solution chemical properties and quality
Vacuum System Inspection Procedure
- Verify vacuum pump functionality and inspect seals
- Check for air leaks throughout the vacuum system
- Document vacuum levels and record deviations
Heat Exchanger Cleaning Procedure
- Inspect evaporator and condenser for fouling or scale
- Clean surfaces to maintain optimal heat transfer efficiency
- Check for leaks, corrosion, or physical damage
Electrical and Safety System Check
- Inspect electrical connections for tightness and damage
- Test all alarms, shutdowns, and interlocks for functionality
- Document results and perform corrective actions if needed